Choosing a Wooden Entry Door

Wooden Front DoorAfter you have had your home and everything in it is well in place, you need to have a safe entry for your safety and also to secure whatever property you have in your home. There are many factors to put into consideration when choosing what kind of an entry door you have to install. There are those who want a wood door while others might opt for metal doors. Here we will focus on choosing a wood door for your entry door and also some tips on how to have a deadbolt lock installed. A quality door with great hardware make your can give your home an upscale feel.

The wood door used as entry and sometimes called the front door gets mainly considered as secure and reliable as your house. Depending on the type of timber used, which in most cases is the hardwood, the front door is seen to offer more protection compared to a metallic door.

The wooden door is also likely to offer many designs, unlike other materials. The wood used can be custom crafted so as to have virtually any size or shape that the homeowner would like.

While comparing the wood door with other types of material, this door is more durable and likely to offer the owner may years of service. There’s much cost of maintenance needed apart from taking good care of the door. You might only need a fresh coat of paint and it can get applied after a couple of years.

Although the wood door gets preferred for the entry door due to its elegant and classic looks, not all types of wood will offer you quality work. The best-preferred woods are the White Oak and Mahogany due to their durability and resistance to pressure. The two types of wood that you can’t use include Adler and Poplar.

When it comes to installing a deadbolt lock, a few tips will help you to do it properly and this include the following.

1. Using the template that came with the dead bolt lock, put it on the door edge and mark out the center holes.

2. By the utilization of a hole saw, drill the face hole from the two sides to prevent any splintering

3. The edge hole is drilled using a spade bit.

4. Mark the outline of the dead bold after inserting it into the side hole and then chisel the mortise for the deadbolt.

5. You then screw the deadbolt to the edge of the door.

6. After you have fixed the deadbolt, you can close the door so as to test the deadbolt.

If your local hardware store does not carry the style or high quality lock products you can visit or contact your local locksmith and see what they have available, many locksmith shops carry merchandise that is not available at big box retailers.

Choosing a solid wood door with classy looking locks, handles and hardware can make your front entrance unique and classic at the same time. Quality is key and the beauty is inherent to the wood!

Installing Harwood Flooring

Hardwood Floors – Add Value and Looks to Your Homemaple-flooring

Installing a modern classy and quality hardwood floors is undoubtedly seen as the most reliable and professional do-it-yourself task. This is because it takes into account some of the professional skills and steps that should be followed keenly. If you follow these steps, you will manage to transform the looks of your house and add warmth, modernity and beauty—it is one of the best ways of getting a sense of accomplishment in your life. You can manage this by following these useful steps;

1. start by laying first row

You will need to start by marking the walls as a sure way of indicating floor joints. You then perfectly cover the floor with a smart felt paper of about 15 pound. Run strips to the joints. Start focusing on layout and later take good measurements of floorboard width. You then drive some nails through the marks and finally stretch the mason line to lay the first row.

2. Pre-drill sizable holes for your nails

Ensure you pre-drill holes for your nails since first and last rows are supposed to be nailed through the boards. You should make sure that you do not experience split face boards. Drill 1/16 inched holes for the nails. Be creative to space the holes to get a perfect result.

3. Tie up first row as you focus on racking the floor

This is a step that helps in aligning the board to get a better layout. When you fasten this row, you manage to rack the floor and simply arrange the hardwood in a manner that shows creativity and great skills.

4. Shape and fit the corners

The corners are usually tricky and you need to be keen enough to get the best results. You cut the corners in a manner that show the designs. Be very creative when filling the hardboards that are of similar designs.

5. Finish by placing the trim

Once through, you install baseboard and a professional shoe molding that helps in covering any gaps. You then nail it creatively to baseboard and clear any mess or chippings.

Framing Interior Walls

Wood FramingFraming an interior wall sounds a lot more complex than it actually is. In fact, the difficulty depends on what you’re using it for.

Lumber Size

For this job you’ll need the appropriate wood size. Most suggest using two-by-fours for this job and then cutting them. Now a two-by-four is usually three and a half inches wide. For a normal wall this will do, but for one that needs plumbing you might want to choose a two-by-six which is five and a half inches.

Spacing

There are a couple different standards for wall spacing. These are 16 inches, 24 inches, and 19.2 inches which is much less common. The most common is 16 inches. This is for first floor interior walls. Second floor or higher, the recommendation is to align the wall studs with the studs of the floor below.

Choosing Quality Lumber

Using the best quality wood for the job is of dramatic importance. Architecture deals with a lot of forces and only the best will withstand the worst of it. You need the best. First, unless your wall is going to be taking a beating, go for a soft wood. Next, find make sure the wood has a stable vertical grain. Finally, buy from a reputable source. Look at reviews and ratings.

Steps

Get all your measurements together.

Find the ceiling joists. If they’re parallel choose one. You’ll have to screw the top plate to the ceiling joists. It’s suggested to use 3-inch screws in the wood. Next you’ll hang a plumb bob from the top plate. Mark where it stands so you know where to put the bottom plate.

Cut two studs for the wall end and screw them in. Fill in the rest of the wall with the studs, using the correct spacing. Remember to double up your studs where the walls meet for extra sturdiness. That’s pretty much all it is, cutting wood and spacing them.